Williams Sound MIC 084, Руководство пользователя и инструкция пользователя

Страница: 10 / 20

MAN 151i
Model WFM 270 TV Talker FM System
10
Setting up the RX270 Receiver
Step 1: Install the Receiver Batteries
Insert the rechargeable battery into the bottom of the RX270 Receiver (see
page 12). Place the receiver into the charger cradle built into the top of
the TX260 Transmitter and let charge overnight. The spare battery can be
plugged into the charging port located on either side of the transmitter. By
keeping the spare battery charged, you can easily swap batteries when the
one in use runs out and always have a fresh battery ready. A fully charged
battery will operate the receiver for approximately 6 hours, depending on the
volume setting. The battery should be changed when you notice the sound
getting weak and noisy. The batteries may be left charging when not in use.
Step 2: Using the WFM RX270 Receiver
To use the system, first check to make sure your TV or audio source is
turned ON. Make sure the receiver battery is fully charged. The RX270
Receiver has an on/off switch on the rear side. Rotate the volume control to
adjust the volume to a comfortable level.
Return the receiver to the charger when it is not in use.
Additional Receiver Adjustments
Balance Control
Use a small screwdriver to adjust the loudness balance between the left and/
or right earphones. See page 11.
The RX270 will work with hearing aids equipped with a T-coil.
The RX270 can be used with stereo earphones or headphones.