2
Input Diagrams
WCA 131
CAT5 Cable
To Phoenix connectors for audio
or control, see Figures 7-9 for
wiring.
Control RS-232
TX/RX/GND
CH B
Line Level
Audio In
CH A
Line Level
Audio In
Power In
TFP 057
48VDC
International
Power
Supply
WCA 133
CAT5 Cable
To Control or Audio Inputs,
See Figures 3-5 for wiring.
CAT5 Cable
WCA 132
POE Switch
POE 001 48VDC
POE Power Supply
LAN + DC
LAN
To Control or Audio Inputs,
See Figures 3-5 for wiring.
OR
Figure 1: POE Input Setup using WCA 133 Adapter Cable and the TFP 057 power supply.
WCA 131
CAT5 Cable
To Phoenix connectors for audio
or control, see Figures 7-9 for
wiring.
Control RS-232
TX/RX/GND
CH B
Line Level
Audio In
CH A
Line Level
Audio In
Power In
TFP 057
48VDC
International
Power
Supply
WCA 133
CAT5 Cable
To Control or Audio Inputs,
See Figures 3-5 for wiring.
CAT5 Cable
WCA 132
POE Switch
POE 001 48VDC
POE Power Supply
LAN + DC
LAN
To Control or Audio Inputs,
See Figures 3-5 for wiring.
OR
Figure 2: POE Input Setup using WCA 132 Adapter Cable and the POE 001 or a third party POE Switch.
Cabling for Inputs
If using the POE 001 power over Ethernet injector, connect either the RJ-45 plug on the WCA 132 or a CAT5 cable directly to the port
labeled LAN + DC (See Figure 2).
Note that the WCA 132 can be plugged directly into the LAN port, which may not leave enough of a cable run to connect to the audio
In all the figures below, check the color coding for the type of CAT5 cable used to determine wire colors if terminating a CAT5 cable.
Input Wiring
Note: The figures below are shown using a WCA 133, but a WCA 132 can be used with the same wiring. In some cables, the yellow wire may
be colored green.
WCA 133
Red - TX
White - RX
Yellow - GND
Black - GND
5
4
3
2
1
6
7
8
9
Figure 3: RS-232 Control Input
