IR T01 Small Area Infrared Transmitter
Figure 1 - IR T1 Coverage Pattern
Connections & Indicators
Figure 2 - IR T1 Rear View
Power In
Power Indicator
(Green)
3.5mm Audio Line Input
Audio Indicator (Ch.1)
(Yellow)
Audio Indicator (Ch.2)
(Yellow)
5VDC 0.2A
IR T1
INFRARED TRANSMITTER
2.3 MHz
LINE IN
2.8 MHz
Connecting Power
1. Snap in the correct adapter for your region into the TFP 055 power supply.
2. Plug the USB end of the “USB to micro USB cord” into the power supply.
3. Plug the micro USB end of the “USB to micro USB cable” into the IR T1.
4. Plug the power supply into an AC outlet.
Alternatively, you may plug the USB end of the cord into a direct USB power
source, such as the USB port on a television, etc. to power the IR T1.
On power up, the IR T1 performs a self-test to detect damage due to shipping,
handling, tampering or incorrect operation. If any failure is present, the green
power LED will blink rapidly. If this occurs, contact Williams Sound Customer
Service.
This system is designed for class 2, low-voltage wiring. Always follow local
electrical codes when using low-voltage wiring.
