MAN 143C
Hearing Helper
™
Wireless FM Listening System
10
Using The R863 Receiver, cont.
Note: Rechargeable batteries are shipped in a discharged state and
must be charged overnight before using.
1. Make sure there are two alkaline or rechargeable AA batteries in the
Receiver. If batteries are not installed, see Battery Information on page
12-13.
2. Plug the earphone or headphone into the “ ” Jack on top of the
Receiver.
3. Put on the earphone or place the headphones over your ears.
4. Turn the unit on: turn the On/Off/Channel switch to position “1” or “2”
or “3.” The Power “ON” LED indicator should illuminate.
5. Select a desired operating frequency. To operate on 863.25 MHz, turn
the On/Off/Channel switch to position “1”; to operate on 863.75 MHz,
turn to position “2”; to operate on 864.75 MHz, turn to position “3.”
Important: Make sure the receiver is operating on the same
frequency as the transmitter! The receiver’s channel switch (1-2-3
position) should match the transmitter’s channel selection.
6. Adjust the receiver volume control to a comfortable listening level.
You should be able to hear the audio being provided to the T800
transmitter.
The receiver can be placed in a pocket, or clipped onto a belt,
harness, or waistband.
IMPORTANT: When the R863 receiver is not being used, remember
to turn the unit OFF by turning the On/Off/Channel switch to the
“ ” power icon position. The Power “ON” LED indicator should
not be lit.
