6
DLT microphone mixing with dock sources
The dock’s inputs - two mono RCA jacks (-10dBV) and one XLR jack (+4dBu)
- are mixed together in the dock, then sent to the DLT 100 2.0. The DLT 100
2.0 then mixes the dock audio with it’s microphone before transmitting.
Depending upon what sources are being mixed, there may be a level
mismatch between the dock and the DLT’s microphone level. The DLT 100
2.0 includes line-level adjustment for proper mixing.
To adjust the DLT 100 2.0 line-level gain, hold the “^” button for 3 seconds.
The default level is “L:5”, or 0dB of gain adjustment. See Figure 4 below for
level settings and corresponding gain/attenuation.
Figure 4: DLT Setting/Digi-Wave™ Dock Functions
Level
Setting on
DLT
0
1
2
3
4
5
6
7
Line-level
Gain/
Attenuation
(dB)
Mute -12dB -9dB -6dB -3dB 0dB +3dB +6dB
Note: The “microphone volume” adjustment can also be used, but may
require other DLTs microphone levels to be adjusted too, which makes
it a more cumbersome method, and therefore line-level adjustment is
recommended.
