MADE IN CHINA
2
ASSEMBL
Y INSTR
UCTIONS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Check to make sure that all plugs are properly connected and the adapter is plugged into the wall outlet.
Refer to assembly guide for instructions. (If the tree comes with a foot pedal, try stepping on the on/off
button).
2. Turn the poles gently to make sure the poles are connected into place.
3. Check for loose, broken or missing light bulbs and replace as needed.
TROUBLESHOOTING TIPS
Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included.
If extra parts are needed, please contact our Customer Service Center at [email protected]
SPARE PARTS
STORAGE INSTRUCTIONS
Fig. D
LOOSE BRANCHES
1. Extra hinge pins are included for repairing the hinges of
the branches. Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using
the retainer washer.
(See Fig. D)
1. Unplug adapter from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove
from section below and fold all branches toward the pole.
3. Continue by gently lifting each section straight up from the section below. Fold all branches toward the pole
until the bottom section is removed from the tree stand.
4. Carefully place all tree sections into the storage bags within the shipping box(es) and tape the box(es) shut.
5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to
excessive heat or humidity may damage your tree.
CAUTION:
To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product. Using a different adapter will damage the
lights and may cause fire, or electrical shock hazards.
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal.
c) Do not mount or support strings in a manner that can cut or damage wire insulation.