Page
6
of
6
17. If you wish to use an umbrella, loosen the Thumb Screw (J) found at the bottom of the Center Leg
Frame (D), as seen in the illustration below.
18. Tighten the Thumb Screw (J) once the umbrella pole is inserted into the hole.
19. If the table does not sit level, adjust the levelers found under the legs (in or out) to stabilize the table.
20. Assembly is complete.
Care Instructions:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on
product’s
surface.
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Customer Service 877.812.6235
www.williams-sonoma.com
