16-September-2021
2/2
© 2021 Williams-Sonoma, Inc.
A
Williams-Sonoma Inc.
Assembly Instructions
Instructions d’assemblage
Instrucciones de Ensamblaje
Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham
CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead
which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
PARTS INCLUDED
1pcs doorbell button
●
1pc Mounting bracket
●
2pcs
φ4X19mm mounting screws
●
1pc M5*8mm set screws
●
1pc Allen key
MOUNTING INSTRUCTIONS FOR TYPICAL WOOD SIDING APPLICATIONS
Note: Consult your local hardware store for proper mounting to other wall materials.
Tools Required: Phillips screwdriver, Pencil.
1.Bore 3/4” hole centered where doorbell button will be located.
2.Position backplate and use it as a template for locating mounting screw holes.
3.Using the two supplied screws to secure mounting bracket to wall or door frame
4.Make wiring connections to terminals on back of button.
5.Slide the product over bracket and secure it with the set screw using the supplied Allen Key.
CLEANING INSTRUCTIONS
1.
Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills and wipe with a clean, damp cloth immediately.
3. We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
4. Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary
