Date:
www.williams-sonoma.com
Page 4 of 5
Rev:
7.
Screw the support leg at the center of the wood slats where a T-nut is located. The T-nut should be on the
top face of the wood slat.
8.
Repeat process on all five (5) wooden slats.
9.
Place the wood slat on the side rail cleats and align it to the pre bore holes on the side rail.
10.
Screw the wood slat into the side rail using the screw gun and tighten until slat is held firmly. Repeat
process on the other side and to all the slats until all five (5) slats are connected.
11.
Assembly is complete
