Page 3 of 4
5.
Attach the center leg (G) to the center rail (F) by inserting the bolt into the insert on the bottom of the center rail
(F), hand tighten until snug (Do not over tighten) as shown in
illustration. 5
.
6.
Attach the center rail (F) to the headboard (A) and footboard (B) by sliding it onto the bed fitting as shown in
fig.
4
,
illustration. 6
.
7.
Lay slats (H) in place over center rail (F) and side rail lips. Attach by inserting the Phillips screws (O) through
pre-drilled holes and tightening with a screwdriver (
not included
).
Illustration. 5
attach center leg to center rail
Illustration. 7
.Install slat
Fig. 5
Illustration. 6
attach center rail to HB & FB
Fig. 4
