Page
5
of
5
6.
Lay the end of Slats (K) to the notch on the cleat mattress support cleat. Secure with Screws (R).
Tighten using Screw Driver (not included) as shown (
Fig.6
)
7.
Assembly is complete.
If the floor is uneven, adjust the recessed levelers found on the bottom of Center Leg.
Turn Leveler Counter Clockwise to
increase height
Turn Leveler Clockwise to decrease
height
Carefully grasp one side of the furniture and elevate it slightly to provide access to levelers.
Turn the leveler until adequate contact is made with the floor.
Carefully set the furniture down.
Repeat until the furniture sits level and stable.
CARE INSTRUCTIONS:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
To protect the furniture from spills, always use coasters.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on teak.
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
For questions or assistance, call 877.812.6235
K
R
Fig.6
