Date: 20‐Jul.‐2015
www.williams‐sonoma.com
Page 3 of 5
Rev:
Assembly Instruction Steps:
1.
Place the Table Top (A) upside down on a soft scratch free surface such as carpet or foam from inside the
shipping box.
2.
Attach the Left Leg (C) and Right Leg (D) to the bottom of the Table Top (A) by aligning the bolts into the pre
drilled holes of the top.
3. Insert the Flat Washer (4), Spring Washer (3) and Hex Nut (6), and tighten with Hex Wrench (5) as seen in the
illustration below.
Note: Do not tighten the bolts at this step.
4.
Attach the Long Stretcher (E) to the Short Stretcher (F) by Half Moon Washer (7), Spring Washer (3) and Bolt
(2), and tighten with Allen Key (1) as seen in the illustration below.
3
1
2
7
4
3
5
6
Williams Sonoma Product Information Dept.
Page 3 of 5
