P:
2 / 3
Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.
Make two insertion marks (C, D) centered along the line using the measurement
“a”.
Use a stud-finder to determine if there is a wall stud[s] located at [each] either insertion mark.
Install the proper hardware, as shown below.
Note that the head of each screw resides about 3/8” from the wall.
For stud mounting:
Tips:
The anchor is self-drillable.
No pilot hole required.
3
5
For non-stud mounting:
4
