William Hackett 033.075, Руководство пользователя

Страница: 16 / 32

16
15. Remove the pinion gears #9 2 pcs and pinion shaft #8.
16. On 750kg/800kg models the top hook load pin and hook can now be removed.
17. The load gear #7 can now be lifted from the load sprocket/sheave.
18. Remove top hook load pin #4.
19. Gear side plate #6 can now be lifted from the main body.
20. Remove parts #3 (2 pcs) and 12 making a note of their position on part #1 the wheel side plate.
21. The load sheave can now be removed.
22. Bearings can now be removed and serviced, plain bushes are a press fit part and not to be removed,
disassembly complete.*
• Thoroughly clean all parts checking for damage, wear or foreign particles, if using a degreaser ensure all
parts are dried and lubricated where necessary prior to assembly.
• Please note split pins nylon locking nuts are classed as single use items.
• It is also good practice to check the condition of circlip retainers and replace where necessary.
*Depending on model and capacity the hoist side plates may be fitted with a plain bush or bearing, this must be
stated when ordering spares.