Wilko WUA150, Инструкция по эксплуатации

Страница: 2 / 8

Please Read
Retain all packaging in case the product needs to be returned.
Contents may vary from photography/ Illustrations.
This product is intended for indoor use only. Use of this product outdoors could lead to failure and
personal injury.
It is the responsibility of the installer to ensure that the mounting wall is of a suitable standard and
void of any services (eg gas, electricity, water etc).
Please read the hints and tips below to help you with the application of your cable management.
Tools Recommended
i
i
ii
iii
iv
v
Ensure you roll wall strip
A
and cover strip
B
smoothly and evenly to prevent creasing.
Ensure both wall strip
A
and cover strip
B
are as flat as possible before attaching to the wall.
Ensure the surface you wish to attach the cable management to is clean and dry.
Ensure that before you attach wall strip
A
you are happy with the position.
Ensure when you attach wall strip
A
to the wall that you press firmly and that you remove all
air bubbles, repeat after 5 minutes.