Wilkinson Star Jasic JT-200P-PFC, Руководство оператора, Страница: 11 / 20

A WILKINSONSTAR PRODUCT 02-18 ISSUE 1
Select the welding current setting function by pressing the welding
parameter selecting key, and welding current in MMA can be set.
Welding current setting can be carried out during welding.
Select the arc ignition time setting function (This function changes into
spot welding time setting function in TIG spot welding mode.) by
pressing the welding parameter selecting key, and arc ignition time in
MMA can be set. Besides, arc ignition time setting can be carried out
during welding.
Select the arc force current setting function by pressing the welding
parameter selecting key, and arc force current in MMA can be set.
Besides, arc force current setting can be carried out during welding.
If the secondary cables (welding cable and earth cable) are long, select cable with larger cross-section to
reduce the voltage drop.
Preset the welding current according to the type and size of the electrode, clip the electrode and then
welding can be carried out by short circuit arc ignition. For welding parameters, please refer to the below
table
.
Electrode diameter (mm) Recommended welding current (A) Recommended welding voltage (V)
1.0 20~60 20.8~22.4
1.6 44~84 21.76~23.36
2.0 60~100 22.4~24.0
2.5 80~120 23.2~24.8
3.2 108~148 24.32~24.92
4.0 140~180 24.6~27.2