English
English
8
9
PLACEMENT
•
Place the product on firm, flat surface.
•
The humidifier should be placed on flat horizontal surface and keep it
steady.
•
Do not place the product near or close to any heat sources.
•
The humidifier should be far away from any heat sources, such as stoves or
fire places. Do not expose the product to direct sunlight.
•
Do not place the product near or close to furniture or electric appliances.
•
The mist outlet from the humidifier should not be directed towards furniture
and the electronic appliances, to avoid damage.
•
Particles in water, such as calcium, can be part of the vapour and be
deposited on objects in the vicinity.
•
It is recommended that the unit be placed on a table or other surface at
least 70 cm above the floor level, to ensure that the vapour will be optimally
distributed throughout the room.
USE
Filling the water tank
Note:
Please check that the power is off before removing
the water tank from the device.
Remove the top surface cover. Hold and lift the leather
tag on the top cover when removing the top cover.
Take out the water tank.
Caution:
Do not tilt the device when raising the water
tank. This may lead to spillage of water remaning in the
device.
Turn the water tank cap counter-clockwise and remove
from water tank.
Pour water in the water tank.
Caution:
Do not use hot water. It may deform the shape
of a water tank.
Replace the water tank cap on the water tank, carefully
check that the water tank cap sealing is properly in place.
Firmly turn the tank cap clockwise until it stops.
Caution:
Be sure to place back the top cover after
refilling the tank. If not, the mist will not be efficiently
distributed.
Connecting the product
Put the power plug into a wall outlet. The power/
water supply indicator will light red when the
appliance is connected to the wall outlet.
Push the power button. The power/water supply
indicator will light up in blue and will start to humidify
with MIN (minimum) mist output. The bottom light
will lid up.
Note:
If there is insufficient water in the tank when the
device is turned on, the power/water supply indicator
will turn from blue to red immediately. Please remove
the water tank and refill it with water.
Note:
The power/water supply display will flash red
when there is not enough water in the water tank
while in use.
Push the power button to turn off the device and pull
out the plug after use.
Caution:
When removing the power plug, be sure to
hold it by the plug. Pulling the cord to remove the
plug may cause the cable to break.
