![Wilfa Dry M Скачать руководство пользователя страница 81](http://html.mh-extra.com/html/wilfa/dry-m/dry-m_operating-instructions-manual_981334081.webp)
17
English
English
TROUBLESHOOTING
• Not all the following problems are malfunctions.
Problem
Possible Causes
Dehumidifier is not operating.
Controls cannot be set.
•
Unit is operating in an area where temperature is higher than 32°C
or lower than 5°C.
•
Bucket is full.
Noise suddenly rises during
operation.
•
Noise will rise if compressor has just started.
•
Power supply problem.
•
Unit is placed on uneven floor.
Humidity does not drop.
•
Area to be dehumidified is too large. The capacity of your
dehumidifier may not be adequate.
•
Doors are open.
•
There might be some device producing vapor in the room.
Little or no effect in
dehumidifying.
•
Room temperature is too low.
•
Humidity level may be improperly set.
•
If unit is operating in a room where temperature is from 5 to 15°C,
it will start to defrost automatically. Compressor will stop for a brief
period of time (fan will operate in high fan speed).
When unit finishes defrosting, it will be back to
When first operated, the air
emitted has musty-odor.
•
Due to temperature rising of heat exchanger, the air may have some
strange smell at the beginning.
Unit has noise.
•
There might be some noise if unit is operating on wooden floor
(resonance).
Swooshing sound is heard.
•
Normal. This is the sound of the flow of refrigerant.
• Problem of Water Leakage.
Problem
Possible Causes
Solution
When using drain hose,
there is water in the
bucket.
•
Examine the drainage joint. •
Connect the drainage joint well.
•
Drain hose is not correctly
installed.
•
Clear the obstacle from the drain hose.
•
Remove the drain hose and replace it.
Be sure that the hose is correctly
installed.
• Dehumidifier does not start.
Problem
Possible Causes
Solution
Power indicator is
not lit when power is
connected.
•
Power is not supplied for the
dehumidifier or the power
plug is not well inserted.
•
Check if power is lost. If yes, wait for
the power to restore.
•
If not, check whether the power
circuit or power socket has been
damaged.
•
Check whether power plug is loosen.
•
Check whether power cord is
damaged.
•
Fuse is blown.
•
Replace the fuse.
Содержание Dry M
Страница 2: ......
Страница 84: ......
Страница 85: ...AS WILFA Industriveien 25 1481 Hagan Norway wilfa com WDH 10_20_02 ...