Wilfa Cool 12, Руководство по эксплуатации, Страница: 13 / 29

13
English
English
• Do not dry the filter with fire or hair drier. Otherwise, it may be deformed or catch fire.
Clean heat discharge pipe
Remove the heat discharge pipe from air conditioner, clean and dry it, and
then reinstall it. (For the method of installation and removal, please refer to the
instruction for ”Installation and disassembly of heat discharge pipe” on page 25).
Checking before use-season
1. Check whether air inlets and air outlets are blocked.
2. Check whether plug and socket are in good condition.
3. Check whether filter is clean.
4. Check whether batteries are installed in remote controller.
5. Check whether joint, window bracket and heat discharge pipe are installed tightly.
6. Check whether heat discharge pipe is damaged.
Checking after use-season
1. Disconnect power supply.
2. Clean filter and outer case.
3. Remove dust and other impurities from the air conditioner.
4. Eliminate accumulated water in chassis (refer to the section of ”Drainage way”
for details).
5. Check whether window bracket is damaged or not. If yes, please contact dealer.
Long-time storage
If you don’t use the air conditioner for a long time, please maintain it by following
steps for good performance:
• Make sure there’s no accumulated water in chassis and that the heat discharge
pipe is disassembled.
• Pull out the plug and wrap the power cord.
• Clean the air conditioner and pack it well to prevent dust.
Notice for recovery
• Parts of gift packaging is recycled. Users are advised to follow local regulations
or take contact with personell at the local recycling center for further guidance.
• If you want to throw away the air conditioner, please contact local division or
consultant service center for the correct disposal method.