FOAM GASKET REMOVAL
FOAM GASKET REPLACEMENT
LENS REMOVAL
1.) Place thumb on lens as pictured above
Align one outside gasket tab to the frame slot, while holding down
1.) If the lens gasket is attached, remove it.
2.) Slide thumb up until you contact the nylon backing of the
with your fnger, press the top of the gasket down until the inner tab
2.) Holding the frame with the inside facing you, use your
gasket
clicks into the slot near the nose bridge. Repeat on the other side.
fngertips to “spread” the frame apart while simultaneously
3.) Continue to pressure the gasket upward until the
pushing the lens out using your thumb.
attaching tabs release
