Assembly Instructions
Steam Roller D375, D376, D377 & Traction Engine D415, D416, D417
Stage 9, Rear Wheels
Illustration 32
91
2 x rear wheels
92
1 x rear axle diam. 5/142 mm
93
1 x gear wheel with drive
94
2 x brass spacers diam. 7x29 mm
95
2 x safety caps diam 5mm
96
4 x washers diam. 10/5.5 mm
Illustration 33
The rear axle (92) is pushed through the burner
chamber housing. One washer (96) is placed on
right the hand side and two on the left hand side.
On the left hand side the rear axle must not
protrude more than approx. 3mm. A spacer (94) is
pushed into the cog wheel (93) and both are
pushed onto the rear axle. Now the axle is pushed
through, so that it protrudes an equal distance on
both sides. The clutch lever must be located
between the cog wheel and the drive prongs.
Illustration 34
A rear wheel (91) is pushed on during which the
prongs must grip between the spokes of the wheel.
Push on wheel locking cap. On the other side, the
spacer (94) and wheel (91) are pushed on and
secured with the wheel locking cap.
Text & illustrations: Wilesco Wilhelm Schröder GmbH & Co., Germany
