Wile Bio Moisture Wood, Руководство по эксплуатации

Страница: 23 / 40

EN
Saving the measurement result for the
average calculation
Make the measurement as usual. When
the result is displayed, push shortly the
MENU - button. A will appear on the
display and the meter will add the
measurement result for the average
calculation. The average calculation is
ready when two numbers, for example
A05 and 25,6, appear alternating on the
display.
In this case A05 means, that the number
of measurement results included into the
average value is 5. Number
25,6 is the
average value of those 5 measurements.
If you do not want to include the
measurement result into the average
calculation, don't make anything after the
measurement, just wait until the meter
automatically goes off and is ready for the
next measurement.
Before calculating the average value of
every new lot of material, make sure
that average calculation memory is
empty and erase it if needed.
3.4.2. Erasing the average calculation
memory
Push and hold the MENU - button. Switch
on the meter with a single press on the
ON/OFF - button.
When you see A on the display, release
the MENU - button. If the average value
appears on the display now, you can
erase it by pushing and holding the
MENU - button. The memory is erased,
when 0 appears on the display.