Step 11
Move the cabinet to the desired location. Leave space
between the back of the cabinet and the wall to work
behind.
Use a Stud Finder to locate a stud within the width of
the cabinet. Lightly mark the
stud’s
location just
below the top of the cabinet with a pencil.
Hardware
1
1
2
”
Pan-head Wood Screw
(2)
Anti-tip Bracket
(2)
3
4
”
Pan-head Wood Screw
(2)
Cabinet Hight
2”
On the wall where the stud is located,
measure up from the floor to the height of
the
cabinet, then subtract 2”.
Next attach the Anti-tip Bracket to the wall at
that location using 2 of the 1
1
2
” Pan
-head
Wood Screws, as illustrated.
BOTH SCREWS MUST GO INTO THE STUD.
1
1
2
: Pan-head
Wood Screw
Warning: This TV lift product must have an anti-tip
device installed to prevent the unit and TV from
accidently being tipped over. Failure to install the anti-
tip device could result in injury or death.
Stu
d
in
w
all
