Toscano
Wood Fired Oven
Installation Instructions
Version 4.0
8
©Wildwood Ovens and BBQs LLC 2009
WWW.WILDWOODOVENS.COM
323.255.6587 All specifications subject to change without notice
PRE CONSTRUCTION CHECKLIST
Order
oven
kit
Order chimney system
Order additional construction materials
Order finish materials
OVEN ASSEMBLY CHECKLIST
Mark an outline on the floor of the desired oven location to ensure an adequate fit
Be certain that you have adequate clearance around the oven from combustible materials
Build foundation and base for oven
Form and pour shelf
Place heat stopper board on dried concrete shelf
Dry assemble the oven sections on top of heat stopper
Apply mortar on all seams of oven to seal gaps tightly
Attach anchor plate and install chimney
Cure refractory fireplace mortar
*
Insulate the oven
BUILDING OVEN ENCLOSURE CHECKLIST
Build
surrounding
masonry
walls
Build roof enclosure
Install finish on walls
Install finish around the oven opening
Adhere Safety Information Plaque on Oven (See Safety Plaque Location Diagram on page 2)
Cure refractory fireplace mortar
FINISH USING THE ADOBE STYLE CONSTRUCTION
Contact a Wildwood sales representative for details.
*
Refractory fireplace mortar
must be cured by starting a low fire in the oven using alcohol can heat until the grout is dry.
Increase heat thereafter to complete the curing for 1-2 hours. DO NOT OVER FIRE!!! If flame spills out of oven opening, you are
over firing. It is of utmost importance that the chimney is attached prior to curing the oven.
*
Oven enclosure
should be finished with non-combustible materials such as: Stones, Brick, Ceramic tiles, Stainless steel, Marble
etc. Do not use combustible materials or adhesives.