www.wildviewcam.com
Toll Free 877-‐269-‐8490
11
SETUP AND PROGRAMMING
Definitions
•
Cam:
To set which mode you want the camera to be in.
Ø
TEST = Test mode
Ø
OFF = Power Off mode
Ø
ON = Active Passive Infrared mode / Power On mode
•
Time out:
To set the amount of time the camera will sleep between PIR
triggering.
Ø
20s = 20 Seconds
Ø
1m = 1 minute
Ø
5m = 5 minutes
Ø
10m = 10 minutes
•
Resolution:
The resolution selection that you have chosen.
Ø
HI (High) = 8.0 Megapixels (Image interpolated from 5M sensor)
Ø
LO (Low) = 5.0 Megapixels
•
Burst
: To set the number of pictures or video length the camera will take
per PIR triggering.
Ø
1P = Single still image captured per PIR triggering.
Ø
3P = Three continuous still images captured per PIR triggering.
Ø
6P = Six continuous still images captured per PIR triggering.
Ø
VIDEO = Places camera in Video mode and will capture video per
setting above.
