www.wildviewcam.com
Toll Free 888-‐304-‐6125
18
Testing the camera coverage area:
One of Wildview Scouting Camera’s features is the ability to test the coverage
area.
1.
After mounting the camera, open front housing and slide the
CAM
toggle
switch to
TEST
position. The front LCD will display the word
“tESt”.
2.
Close the front housing.
3.
Walk around to the front of the camera to see if you have mounted the
camera in the proper position. The green TEST light indicator on the front
will blink when you have intruded the coverage area.
4.
Adjust the camera position as needed and repeat testing until the
desired coverage area is achieved.
5.
When you have completed testing the coverage area, open the front
housing and slide the
CAM
toggle switch from
TEST
position to the
ON
position.
Ø
Caution:
Do not move the switch from TEST directly to ON. Doing so
will cause the camera not to operate. Slide the switch to OFF. Wait
for the front LCD screen to turn off, then continue to slide the switch
to ON.
6.
The front LCD counter will show “0000” and the green indicator light will
start blinking. The camera will enter count down mode for 1 minute,
giving you one minute to leave the coverage area. Then camera will be
armed and enter the PIR detection mode.
NOTE: Make sure you slide the power switch from TEST mode to ON mode
before you leave the field, otherwise the Camera will not take any pictures.
Содержание InfraredXtreme STC-TGLX2IR
Страница 4: ...www wildviewcam com Toll Free 888 304 6125 4 CAMERA OVERVIEW Front view Side view ...
Страница 5: ...www wildviewcam com Toll Free 888 304 6125 5 Open view image with major parts indication ...
Страница 17: ...www wildviewcam com Toll Free 888 304 6125 17 Example Mounting Example Trail Setup ...
