Mounting Device
Before starting to put this camera in the field for scouting game, the camera must be mounted in a certain
place properly or on a tree whose diameter will not be less than 6 inch (15cm) and located not higher than 1M
with your desired mounting method that following the installation method as shown as below. The design is
reserved to fit for two ways of mounting.
A Belt Mount
: This belt is attached in the packing. See the Fig.5
B Python Adjustable Locking Cable (Not including in this packing):
See the Fig. 6
You can able to use a Python adjustable locking cable to provide higher security level to your camera. The
“
Master Lock
”
brand is a good choice.
Metal Bracket and U Bar:
With more optional choice for high leval security, a
steel mounting bracket and U type security bar kit can
be choosed to provide much stronger security ability.
You can buy this accessory kit from your local dealer.
Solar Panel Mouting Bracket Assembly:
The
Solar mounting bracket is required assemble with the
parts as the Fig. 8 by DIY. The part No. can be refered
to the check list in the beginning. After done, please
refer to the Fig. 9
Solar Panel Connection:
Solar panel is set it to the place within 5 meters
where it will catch much more sun shine and expose
with the longest times under sunny environment.
Plug the Solar cable to the Solar Panel port on the
main unit. Once it works under sunshine, solar capacity
level meter will show a charging status. The solar
powered component will always suppy energy to
camera in 24 hours and will always be charged under
sunlight.
Optimized Tilt of Solar Panel
To achieve the greatest efficiency from a solar panel, it
must be properly placed and pointed with respect to the sun's
position in the sky. Installation angle and direction adjustment
