Wildpix Pro 1.0, Инструкция по эксплуатации, Страница: 8 / 26

-
6
-
3. Quick Start
3.1 How to Start the Camera?
Turn “Power Switch”
to SETUP position.
Note: Camera comes pre-programmed with factory default settings. So for test purpose,
user only needs to insert a SD card and batteries to start test by powering on.
3.2 How to Set the Functions?
a. Turn
“Power Switch”
to SETUP position to enter test mode,
then press button “Menu” once to
enter camera setting menu;
Use navigation buttons
“←”
,
“↑”
,
“→”
, or
“↓”
to obtain favored settings, press
“
OK
”
for confirmation and save the preferred change, press
“
Menu
”
to exit current page;
b. Turn
“Power Switch”
to ON position to enable camera to work on PIR.
c. Camera LED indicator flashes 5 times before it gets into PIR auto working mode.
Note: For some settings, user needs to press “Menu”
to save & exit the configuration
after pressing “OK”to confirm; (Cam ID, Delay, Time La
pse, Timer, Password)