IOP 005A.5
Effective Date: 1/06/2017
Page 2 of 2
PROCEDURES:
Connect unit to a suitable 110v power supply. Press
FWD
button to
start the pump. Feed rate adjustments
are performed by pressing the yellow
UP
or
DOWN
arrow keys while the pump is operating. This pump is
used to deliver 5 to 30 L of lampricide per min. This increases or decreases the RPM of the pump motor
and the feed rate. To stop pumping press the red
STOP
button.
MAINTENANCE:
Little user-maintenance is required or possible. Assure that the electronic unit is clean of dust, dirt, and
moisture.
REFERENCE:
“Baldor Series 10 Inverter Control” installation & operating manual.
This procedure has been reviewed and approved by the undersigned representative of the U.S.
Fish and Wildlife Service.
REVIEWED/APPROVED______________________________ DATE____________
Field Supervisor (U.S.)
Jessica M. Barber
Digitally signed by
JESSICA BARBER
Date: 2020.03.10 10:37:26
-04'00'
