5. Reset of the gateway
In case you need to reconfigure the gateway, you should perform a reset procedure, as
shown on the picture. The switch marked as “Reset/Default” is situated on the rear panel of
the W04FXS and on the front panel of other models.
• use the paper clip or the object of the similar shape to press the button
• hold the button until all the LEDs of the gateway stop blinking and remain turned on (circa
10 seconds)
• release the button and wait for the reboot of the gateway
In case the LEDs remain turned on for more than one minute after the reset procedure,
disconnect the power supply and repeat the reset procedure when the device starts.
W04FXS-W08FXS-W16FXS-W24FXS Quick Installation Guide
5