Installing Batteries
With the camera facing up, open
the battery compartment at the
bottom of the camera by turning
them to the left.
1.
With the bottom of the camera
towards you, load 6 AA batteries with
the positive ends towards you in the
left battery chamber and load 6 AA
batteries with the positive ends
towards you in the right battery
chamber.
2.
Close battery compartment cover
by turning them to the right.
3.
Open the door at the bottom of
the camera by unlatching the
locking tabs.
4.
Load SD memory card
(up to 32GB not
included)
into the SD card slot with the
connectors facing down.
5.
TIPS:
Make sure the SD Card is unlocked (small
switch on the side of the SD Card) or the
camera LCD will read “LOCK”.
IMPORTANT:
Make sure the camera is powered off before
removing or installing an SD card.
If you are using an SD card from other
cameras, please make sure to format the SD
card in your computer prior to use in your
camera. New cards are ok to use straight from
the package.
page 3
page 4