manualshive.com logo in svg

Wildcat MINIBMX, Руководство пользователя

Поделиться
Скачать
Wildcat MINIBMX Скачать руководство пользователя страница 23

WILDCAT MINIBMX USER GUIDE

21

WARRANTY

Manufacturer’s Warranty

All frames carry a limited lifetime warranty against 
manufacturer defects. All parts are warranted for 
a period of 1 Year from date of purchase against 
any manufacturing defect, all coating is warranted 
for a period of 3 Months from date of purchase. 
Parts found to be defective will be replaced free 
of charge. The purchaser is liable for all labour 
connected with the repair or warranty work, plus 
related courier charges.

This Warranty is effective only if:

•  Your MiniBMX is completely and correctly 

assembled

•  Your MiniBMX is used under normal conditions 

for its intended purpose

•  Your MiniBMX receives all necessary 

maintenance and adjustments

What is not covered by this Warranty?

This Warranty does not cover normal wear and 
tear, normal maintenance items, corrosion or any 
damage, failure, or loss that is caused by improper 
assembly, maintenance, adjustment, storage, or 
use of the bicycle.

The claimant must be the original owner/
purchaser and produce a receipt to prove the 
date of purchase. Parts found to be defective 
will be replaced free of charge. The warranty 
covers unexpected failure or defect of all parts/
components that may not be attributed to fair 
wear and tear or crash damage outside that 
considered normal use. 

This Warranty is effective only if the bike is 
correctly assembled, the bike is used under 
normal conditions for its intended purpose 
and receives all necessary maintenance and 
adjustments. This Warranty does not cover normal 
wear and tear, normal maintenance items, or 
any damage, failure, or loss that is caused by 
improper assembly, maintenance, adjustment, 
storage, or use of the bicycle.

This Limited Warranty will be void if the bicycle is 
ever modified in any way, ridden by more than one 
person at a time, or rented / used for hire or events.

Disclaimer

Wildcat and the reseller will not be liable for 
incidental or consequential loss or damage, due 
directly or indirectly from use of our products.

Содержание MINIBMX

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды