5
Kickstand Assembly (Figure 4.)
1.
Elevate the entire bike securely (hook seat on edge of table)
2.
Slide hole in “L Bracket” for spring over “Cross tube” of the
frame and bolt using large bolt to top of bicycle frame.
3.
Align the kickstand holes with “Cross tube” on the main frame.
Allow short legs of kickstand to face rear of bicycle.
4.
Slide the shaft through both kickstand holes and through “Cross
tube” of the frame. Use large washers on each end.
5.
Using hair pins fasten shaft in place making sure it is centered
6.
Attach one end of spring to kick stand and one end to “L-
Bracket” for spring. (You will need to pry open ends then re
pinch)