WIKA operating instructions attachable indicator model A-IAI-1
4
EN
14016825.04 07/2021 EN/DE
1. General information
1. General information
■
The model A-IAI-1 attachable indicator described in the operating
instructions has been manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria
during production. Our management systems are certified to ISO 9001
and ISO 14001.
■
These operating instructions contain important information on handling the
instrument. Working safely requires that all safety instructions and work
instructions are observed.
■
Observe the relevant local accident prevention regulations and general
safety regulations for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in
the immediate vicinity of the instrument and readily accessible to skilled
personnel at any time.
■
Skilled personnel must have carefully read and understood the operating
instructions prior to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by
using the product contrary to its intended use, non-compliance with these
operating instructions, assignment of insufficiently qualified skilled person
-
nel or unauthorised modifications to the instrument.
■
The general terms and conditions contained in the sales documentation
shall apply.
■
Subject to technical modifications.
■
Further information:
- Internet address:
www.wika.de / www.wika.com
- Relevant data sheet:
AC 80.07
- Application consultant: Tel.: +49 9372 132-0
Fax:+49 9372 132-406
