4
11265191.10 08/2019 EN/DE
Differential pressure gauge models 712.15.160, 732.15.160, optional for hazardous areas
EN
1. General information
■
The instrument described in the operating instructions has been designed and manufac-
tured using state-of-the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems are certified to ISO
9001 and ISO 14001.
■
These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations
for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicini-
ty of the instrument and readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions prior
to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the product
contrary to its intended use, non-compliance with these operating instructions, assignment
of insufficiently qualified skilled personnel or unauthorised modifications to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
- Internet address:
www.wika.de / www.wika.com
- EN 837-2
Selection and installation recommendations for pressure
measuring instruments
Model
Ex version Description
Data
sheet
712.15.160,
732.15.160
Option
Differential pressure gauge
PM 07.29
891.44
No
Integrated transmitter electronics (option)
PM 07.29
892.44
Yes
Integrated transmitter electronics (option)
PM 07.29
828
No
Magnetic snap-action contact (option)
PM 07.29
212.20.100 No
Pressure gauge for working pressure indication (option)
PM 02.01
232.50.100 Option
Pressure gauge for working pressure indication (option)
PM 02.02
232.30.100 Option
Pressure gauge for working pressure indication (option)
PM 02.04
A-10
No
Pressure sensor for working pressure (option)
PE 81.60
IS-3
Yes
Pressure sensor for working pressure (option)
PE 81.58
Depending on the version, observe the additionally enclosed operating instructions!
1. General information
