3
– The device cannot be installed in an aggressive environment or the environment exposed to
explosion.
– The heater should not be used with the load voltage lower than 200 V.
– Only original parts can be used.
– All maintenance works should be conducted when the device is disconnected from the power
source.
– Do not allow the electrical wiring to become wet.
–
Regularly clean the faucet aerator.
–
–
Children should be supervised to ensure that they do not play with the device.
3. Installation of the heater
Wiring diagram
TN-S earthing system
F2 – bipolar circuit breaker
L – phase wire
N – neutral
PE – protective earth
Minimum recommended cross section of cables
Perfect 3
.
5
MIX
– 1,5 mm
2
Perfect 4
.
0 – 5
.
5
MIX
– 2,5 mm
2
– 16 A
Recommended breakers:
Perfect 3
.
5
MIX
Perfect 4
.
0 – 5
.
5
MIX
– 25 A
heater
This device may be used by children over three years old and people with limited physical,
sensory or mental abilities, or with no experience and knowledge if they are supervised or
were provided with instructions regarding the use of the device in a safe way and understand
possible dangers.
