5
DE
General safety warnings
EN
›
Prevent unintentional starting. Ensure the switch is in the off-position before con-
necting to a power source and/or BATTERY pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have
the switch on invites accidents.
›
Remove any adjusting key or wrench before turning the power tool on.
A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
›
Do not overreach. Keep proper footing and balance at all times.
This enables better
control of the power tool in unexpected situations.
›
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
›
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
Use of dust collection can reduce dust-
related hazards.
›
Do not let familiarity gained from frequent use of tools allow you to become compla-
cent and ignore tool safety principles.
A careless action can cause severe injury within a
fraction of a second.
1.4 Power tool use and care
›
Do not force the power tool. Use the correct power tool for your application.
The cor-
rect power tool will do the job better and more safely at the rate for which it was designed.
›
Do not use the power tool if the switch does not turn it on and off.
Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
08/01/21
Original instruction manual
