WIFO K54A-I, Руководство и инструкции по безопасности

Страница: 26 / 32

24
3.2 Troubleshooting
Box rotator model Problem Solution
All models. The box rotator is not in a horizontal position if
the piston rod of the cylinder is fully retracted.
Loosen the clamping bolts at the ends of
the piston rod and screw/unscrew the
piston into/from the block. Proceed until
the fork carrier is in a horizontal position
with the back plate. Tightly secure the
clamping bolts.
The cylinder head has clearance in the cylinder
tube.
If there is any clearance, please contact
WIFO-Anema BV. We strongly recommend
not to use the machine till further
instructions.
K54A/K54C/SK54A/SK54C There is some play in the bearing (sleeve bearing)
on the shaft of the fork positioner.
The bearing is worn-out and must be
replaced by a skilled mechanic.
K54A-Z/K54C-Z/SK54A-
Z/SK54C-Z
There is some play in the bearing (tapered roller
bearing) on the shaft of the fork positioner.
Loosen the lock nuts of the socket set
bolts; fasten the socket set bolts by hand
in the locking plate and turn one quarter
back. Proceed with tightening the lock
nuts.
Table 3.2.1-Troubleshooting
Please contact your dealer for any further concerns you may have. He will be pleased to assist.