ODU:
Outdoor Multi-function Radio Figure
1
RJ-45 Port
Use the SFTP cat.5 cable with weatherproof connector to connect to the “To
ODU” side of the POE injector.
2
N- Jack Antenna
Connector
Here you can attach the proper antenna with the outdoor radio to wirelessly
connect to the networks. In order to improve the RF signal radiation of your
antenna, proper antenna installation is necessary.
3
Grounding stud
Connect to the ground conductor with the ground wire.
4
Reset button
Revolve the screw and insert a stick to press in and hold the reset button for 5~10
seconds, the radio will back to factory default settings.
PS. The spec of the screw is “Button head socket cap screw 4*6 iso”.
5
Membrane Vent
1. Moisture vapor permeable to help aid in condensation and fogging reduction
in the ODU.
2.
High airflow allows pressure equalization to prevent stress on enclosure seals
This equipment must be grounded. Never defeat the ground conductor or operate the
equipment in the absence of a suitably installed ground conductor. Contact the
appropriate electrical inspection authority or an electrician if you are uncertain that
suitable grounding is available.
PDH / Ethernet Convergent System Quick Installation Guide
N- Jack Antenna
Connector
Grounding stud
RJ-45 Port
Reset button
Membrane Vent
