WIELANDER+SCHILL IM 240-i, Руководство по эксплуатации

Страница: 4 / 28

IM 240-i Operation manual
Seite 4
1 INTRODUCTION
Dear customer!
Congratulation to purchasing of this quality inverter welding machine. Please read whole
Operation manual before you start.
1.1 Product introduction
IM 240-i welding machine is compact MIG-MAG welding inverter especially developed for
car body repair. Its excellent brazing characteristic as well as good steel welding possibilities
enables to use this device to repair all kinds of vehicles with fine quality results.
Be aware of danger resulted from welding and follow the safety and fire instructions (see the
Part 7).
It is necessary to keep the device on a dry place, to protect device against moisture. It is not
advisable to use the device on the open air during rain.
2 SETUP
2.1
Setup conditions
It´s necessary to set the device for welding in protection atmosphere on a dry place with the
sufficient area for cooling. The device is designed for use in covered area (under roof).
2.2
Selecting the accessories
Before using the machine, please make sure it was not damaged during transport!
List of accessories:
- Hose package MB15 3-meter,for steel with wire guide spiral
- DV rollers steel 0,8/0,6 mm
- Ground cable 4 m
- Operation manual