Wieland 83.041.0869.1, Руководство пользователя

Страница: 17 / 26

5 | Router Design
18
Wieland Electric GmbH | BA001037 (Rev. A) | 08/2016
5.8.8 Reset
When PWR LED starts flashing on the front panel, it is possible to restore the default configuration of the
router by pressing the RST button on the rear panel. After pressing this button the default configuration
is restored and then router reboots (green LED will be on).
Note!
For pressing the RST button a narrow screwdriver can be used.
Router reset
Attention!
We recommend backing up the router configuration (see Configuration manual) be-
cause reset of the router sets the configuration to the default state.
It is important to distinguish between reset and reboot the router.
Action Router behavior Invoking events
Reboot Turn off and then turn on router Disconnect and connect the power,
Press the Reboot button in the web configuration
Reset Restore default configuration and
reboot the router
Press RST button
Description of reset and restart router
NOTE
ATTENTION