Wi-Fi module
Wieland Electric GmbH | BA000917 | 08/2021 (Rev. C)
31
8.2.1.2
DHCP
Information about DHCP server activity can be accessed by selecting the
DHCP status
item. The
DHCP server provides automatic configuration of devices connected to the network managed by the
router. The DHCP server assigns an IP address, netmask, default gateway (IP address of router) and
DNS server (IP address of router) to each device.
The following table lists description of lines that are displayed in the DHCP status window for each
configuration.
Table 4: Information about lease address
Item
Description
lease
Assigned IP address
starts
Time of assignation of IP address
ends
Time of termination IP address validity
hardware ethernet
Hardware MAC (unique) address
uid
Unique ID
Figure 28: Wi-Fi DHCP status
8.2.1.3
Scan
If you want to scan neighboring Wi-Fi networks, press
Scan
item. Scanning can be performed if the
access point (WiFi AP) is off.
Item
Description
BSS
MAC address of access point (AP).
TSF
A Timing Synchronization Function (TSF) keeps the timers for all
stations in the same Basic Service Set (BSS) synchronized. All sta-
tions shall maintain a local TSF timer.
freq
Frequency band of access point (AP).
beacon interval
Period of time synchronization [kus] (1,024ms).
capability
List of access point (AP) characteristic.
signal
Signal level of access point (AP).
last seen
Last response time of access point (AP).
SSID
Identifier for access point (AP).
Supported rates
Supported rates of access point (AP).
DS Parameter set
The channel on which broadcast access point (AP).
