Hardware description
Wieland Electric GmbH | BA001269 | 09/2021 (Rev. A)
15
4.2.1
Interfaces
Here you may only exchange the electronic module!
Here you may only exchange the electronic module!
PM – Power module
For wires with a core cross-section of 0.08 mm² up to 1.5 mm².
Pos. Function
Type
Description
1
–
–
not allocated
2
DC 24 V
Input
DC 24 V for power section supply
3
0 V
Input
GND for power section supply
4
Sys DC 24 V
Input
DC 24 V for electronic section supply
5
–
–
not allocated
6
DC 24 V
Input
DC 24 V for power section supply
7
0 V
Input
GND for power section supply
8
Sys 0 V
Input
GND for electronic section supply
X1/X2: RJ45 interface
2x 8pin RJ45 jacks
•
The RJ45 jacks serve as interface for connection to Ethernet to communicate via Mod-
bus/TCP.
•
The interface is designed as switch.
•
So that you can access your
ricos
FLEX modules via Modbus/TCP, you have to assign valid
IP address data to the
ricos
FLEX BC MODBUS. See also 6.3 Setting the IP address, p. 39.
CAUTION