Snow Master Vario Flex 3370
3 Safety notes
02 | 2019
3370 99 01 – 003
21
3.7.2.
Securing the raised device and device parts to prevent them from descending
WARNING!
Risk of injury due to the device or device parts descending!
Prior to performing any work below a raised device or raised device parts, secure the respective device
or device parts and prevent them from descending using a rigid safety prop or hydraulic locking device
(e.g. stop valve) and suitable supports.
To securely support the device or device parts:
Only use suitable and adequately dimensioned materials as supports.
Car jacks are not suitable for supporting the device or device parts and therefore must not be used for this
purpose.
3.8.
Safety mark on the device
Safety stickers on the device offer warnings against hazards in
danger areas and are an important component of the devices
safety equipment. Missing safety stickers increase the risk of
serious or even fatal personal injuries.
Clean soiled safety stickers.
Check all safety stickers after all cleaning work to
ensure that they are still complete and easily legible.
Immediately replace any missing, damaged or illegible
safety stickers. (replacement safety stickers are
available from your dealer)
3.8.1.
Position and meaning of the safety stickers
Operating Instructions
These operating instructions contain all important information
necessary for safe device operation.
Carefully observe all safety instructions to avoid
accidents.
Read operating instructions!
Danger of crushing through moving parts
Never reach into crushing hazard zones while parts
located there can still move
