Wiedamark.com | 4016 Harry Hines Blvd, Dallas, Texas 75219 | 800.893.9787
ColorSpot HP 36x1W RGB LEDs, ETL Listed
This indoor or outdoor, full-color capable LED fixture can
project light up up 50’, depending on beam angle. It is frequently
used for decorative illumination of architecture, column and tree
up lighting and anywhere you desire a strong “pop” of color.
Integrated DMX controls and settings can be accessed from the
end-mounted 4-button control panel with display. The unit can
also be operated completely independently without any need for
external controllers or additional wiring by activating any of the
on board pre programmed effects.
Specification
• Size: 8.2”
• Weight: 7 lbs
• 36 1 Watt LED’s
• Material of Shell: Aluminum alloy
• Rotary angle: 150 ° (vertical) & 60 ° (horizontal)
• Input Voltage: 100V~256V AC
• Protection Rating: IP65
• Operating Temperature: -20º C ~40º C
• Operating Voltage: 12V DC or 24V DC(for power LED)
• ETL Rated
1. Preprogrammed Operation. Select program, adjust color
and speed options using buttons and display located on end of
fixture.
2. DMX Operation. Use buttons and display to assign DMX
address. Connect to DMX controller via the 3-pin IP68 threaded
connector.
3. Master/Slave Mode. Synchronize multiple units by intercon-
necting with IP68 threaded DMX cabling and assigning one unit
as “Master” and other units as “Slave” via the buttons and display
on the end of the fixture.
FUNCTIONS SECTIONS INDEX:
