Widinovations Widlaser C500, Руководство пользователя

Страница: 32 / 41

widinovations Confidential ©
32|41
V
3.3
4.10. Power ON/OFF
4.10.1. widlaser C500 turn ON sequence
1. Ensure that the machine is connected to an energy outlet.
2. Verify that the circuit breaker is on the ON position.
3. Verify that the emergency buttons are unlocked.
4. Remove any object from the working area.
5. Turn ON the Main Power Button, at this point energy is provided to the system and the machine light is on.
6. Allow the machine to finish the turn up sequence, and move to the last Origen point.
7. Connect the computer to the machine by a USB connection or via Ethernet.
8. In the machine software, open the file and download it to the machine, if needed give it a name, up to 8 characters.
9. Place the material over the machine table. If needed move the table down to be able to fit the material over the table,
Z
 
10. Move the laser head to a position over the material, away from the material edges.
11. In the machine display

surface.
12. hed the machine is at the correct focal distance to initiate work.
13.
position.
14. The latest downloaded file is already loaded in the system, but to be able to access the preview and job settings on the
15.
16. Adjust the auxiliary air, to the desired pressure, using th
17. Turn on the Exhaustion (If necessary).
18.
4.10.2. widlaser C500 turn OFF Sequence
1. Move the laser head to the top right corner.
2. Turn OFF the extraction, if applicable.
3. Turn OFF the Main Power Switch.
4. Remove all material from the machine working area.
4.11. Safety door
The machine door is connected directly to an interlock circuit. Therefore, starting a job is only possible with the
door closed.