Widex nEARCOM, Быстрое руководство

Страница: 4 / 16

Fitting the heARing AiDs
hearing aids which have never been fitted must be assigned to the correct side in
Compass – left and right.
detect hearing aids as follows:
1. to identify hearing aids, make sure they are placed in the middle of the nearcom
neck loop and then use the Play buttons under identify ha. when you select a
Play button, the relevant hearing aid plays a sound for 6 seconds and in some
models a light-emitting diode lights
1
.
2. while this is happening, remove the hearing aid from nearcom and listen to it.
3. in Compass, select whether the hearing aid is for the left or right ear.
4. repeat the procedure if you are fitting two hearing aids.
5. Click
Next to connect the hearing aids.
1
Only applicable to CLEAR440 PA and m-models