Widearea AEC-B4P-D48, Руководство по установке

Страница: 7 / 8

ADSL Loop Extender Power Supply Installation Manual Page 6
This publication may not be reproduced in whole or in part without the express written permission of
Widearea.
Install the power supply
Figure 2 the front panel of AEC-B4P-D48
In figure 2, the indicators PWR11~PWR22 indicates the status of the equipment.
After power supply is connected, press the button K11~K22, and the
corresponding PWR indicator should be solid on. Flashing indicator indicates
short circuits or over-current alarm condition.
Figure 3 the back panel of AEC-B4P-D48
In figure 3, the outlet J1 and J2 are the 116V output terminal. You can get 2
х
116V(no polarized) from each outlet. You can connect DC48V through the 2
×
3-core power cord.
Table 2- the Description of the buttons, indicators and outlets
Buttons, Indicators and Outlets description
K11 PWR11
J1
First group and first output.
A11 B11
K12 PWR12
J2
First group and second output.
A12 B12
K21 PWR21
J3
Second group and first output.
A21 B21
K22 PWR22
J4
Second group and second output.
A22 B22
PWR11~PWR22 indicators should be solid on. Flashing indicator indicates short circuits or
over-current alarm condition.
①
Connect the power supply cable