ADSL Loop Extender Installation Manual
Page 10
This publication may not be reproduced in whole or in part without the express written permission
of Widearea. Tel:8628-84207501 8628-84207506
CAUTION: MUST BE GROUNDED RELIABLY.
Table 5 - Twist-wires Connection Description of AER800-2P
CAUTION:MUST BE GROUNDED RELIABLY.
After power on, the “STATUS” LED should be lightened in a few seconds and
remain on during normal system operation.
③
Power up
After confirming that all the twist-pair cables are connected correctly and
enclosure is securely installed, power up the system. The ADSL Loop Extender
will work in 20 seconds after power is supplied stead
Attention:
a) “A” and “B” represent A and B wire of the twist-pair. No polarity.
b) Before power up the system, please make sure all the connections are
correct.
c) When the power supply wire is active, do NOT operate the A and B
wire of the supply pair simultaneously. The A wire and B wire should
be isolated.
Cable II
Cable I
Color
Connection
Color
Connection
Blue/White
unused
Blue/White
Remote PWR
Orange/White
to DSLAM.
Orange/White
to DSLAM.
Green/White
to Modem.
Green/White
to Modem.
Brown/White
unused
Brown/White
unused
