Please note: Tap heads shown are for illustration purposes only.
MONO SINK MIXER
INSTRUCTION MANUAL
Страница 1: ...Please note Tap heads shown are for illustration purposes only MONO SINK MIXER INSTRUCTION MANUAL ...
Страница 2: ... highest standard and are covered by a 10 year manufacturing guarantee GENERAL SAFETY INSTRUCTIONS Prior to drilling into walls check there are no hidden electrical wires cables or water supply pipes with the aid of an electronic detector Always wear protective equipment such as safety glasses and hearing protection whilst using power tools ...
Страница 3: ...r Company or the Water Regulations Advisory Service WRAS a Identify all components and check pack contents b TURN OFF WATER MAINS SUPPLY The mains stopcock is usually situated where the supply enters the building c It is also recommended that the water heating arrangements are turned off d Isolate the hot and cold supply pipes and drain both water systems It is recommended to ensure complete drain...
Страница 4: ...to Threaded Stud 8 Now fit Fixing Nut 7 onto Threaded Stud 8 DO NOT OVERTIGHTEN 5 Bend the Braided Connector 9 to the water supply using suitable plumbing joints 6 Turn on the water supply and re fill the system Check immediately for leaks It is always advisable at this stage to flush out the system To do this open both valves fully and allow water to flow for approximately 1 minute This will remo...
